is proud to introduce

Pave-Fix

A new PVC edge restraint for concrete pavers

The Pave-Fix Advantages

Strong and easy to install edge restraint for pavers
One single unit can be used for straight or radius installations
No snipping or cutting is required for radius installation
Edging design gives the turf more room to anchor its roots so as to increase the strength of the system and to get greener turf along the edging
Reversible design, pavers can be installed on either side of the vertical wall
Edging design requires small storage area
Manufactured from environmentally responsible and strong recycled PVC

Excavate and install a gravel base at least 6” to 8” past the perimeter of the actual residential paved area or at least 8” to 12” past the perimeter of the actual commercial paved area.
Lay Pave-Fix along the perimeter of the pattern, with tabs facing inwards if done prior to pavers installation or outwards if done after pavers installation.
Anchor the edging with spikes on top of the compacted and graded gravel base (not on top of the sand bedding). Use one spike (10” by 3/8” standard spikes) every 3 to 4 feet for a residential area or one spike every 1 to 2 feet for a commercial area.
Backfill the entire perimeter with topsoil and then seed as normal. Pave-Fix should not be visible when the project is completed.

Pieces are 7’6” long (90 inches)
16 pieces per bundle (120 feet per bundle)
33 bundles per pallet (3960 feet per pallet)
Spikes not included

D.I.T. Equipment, INC.
1400 Marie-Victorin, #201
St-Bruno, Quebec, Canada
J3V 6B9

Toll Free: 888-503-8812
Telephone : 450.653.2523
Fax : 450.653.9686