USED EQUIPMENT

DIT Equipment is a dealer of used concrete equipment including batching systems, mixers, block, paving stone, slab and pipe machines, cubers, splitters, and more.

”For more information on how we operate regarding used equipment, follow this link

Select a category:
Recent Listings Only:
Selected Category:

Last Updated:

ID Category
Supplier / Model
Condition Year Manuf. Description Photos/Videos  
  Aging Equipment            
11447   Aging Equipment
/ Chain system
 
.   .  4 station chain surface treatment aging system for pavers. Rounds the 4 top edges to give the tumbled look.Variable chain drive. Adjustable exposition bars under the chains. Cycle time is about 4 minutes per cube or 13 seconds per layer. Comes with in-feed scissor table and downstacking cuber. Also with remote control for lift truck operator. Fully automatic,with Allen bradley controls.No brand name but a well constructed system.      
11733   Aging Equipment
Besser / Antiquing machine
 
good   2001  To age SRW      
37060   Aging Equipment
Corso /
 
Very good   .  Bushhammering system. C./W. Pass-through conveyor.Very good sytem easy to operate & low maintenance.      
  Batching Systems            
10283   Batching Systems
Century / 60M
 
Very good   .  Century 60M Portable Batch Plant. Was completely refurbished and painted. Productivity: 60 yards per hour On load cells / digital read outs. Manual push button panel. Easy to operate. Come with some ware parts for the Praschak 54. cuy. Ft. Mixer. See attached brochure for specifications.      
10967   Batching Systems
Concrete Blender /
 
good   .  Small batching plant for trailer type concrete. Complete batching plant with 15 yard hopper, mixer, 200 bags cement silo and dust collector. Productivity of 15 yards per hour. Including 8 or 9 very good trailers to haul the material.      
11798   Batching Systems
/
 
Very good   2005  Capacity of each bins 4 x 35 tons, for a total capacity of 140 tons. Weighing conveyor 51-ft long 36” wide. Easy to ship.      
12058   Batching Systems
Erie Strayer / MG-11
 
good   1992  Year of manufacturing: 1992 - 200 ton aggregate into bins and four positions turn over. 48 inches transfer conveyor. Wet and dry diverter to load ready-mix truck and/or go to the premix 12 c.y. mixer. 12 c. y. batching system. Premix 12 yard mixer with Poly blades. 30 inches feed conveyor with loader hopper. Gear and Mechanics in good condition. 1000 barrel cement bins - 2 compartments. Controls are included. Eagle Plus batch computers with DRO and printer. Griffin dust collector for wet and dry batch. Plant has been shut off for the past 3 years.      
12194   Batching Systems
Erie Strayer / Mobile
 
.   .  CONCRETE PLANT, 250 YARDS PER HOUR ERIE - STRAYER Central Mix (or Dry Mix) Concrete Plant, Rated @ 250 yards per hour. Only produced 25,000 cubic yards. Used as a backup plant on jobsite.Could be switched back to Dry Mix Plant. Plant Is on the ground and ready to be loaded.      
12326   Batching Systems
SGME/Belgium / 5000 liter
 
Very good   1992  SGME 150 m³/h concrete batching plant very good condition SGME concrete batching plant year 1992 manufacturer: SGME/Belgium Capacity: 5000 liter = 150 m³/ including many spare parts, plant already dismantled      
14166   Batching Systems
Elba /
 
New   .  NEW Elba german made batching plant for pavers, block or precast indutry.535 ton cap in 4 compartments for aggregate,2 cu.yd. Elba mixer and two travelling bucckets.      
15736   Batching Systems
Oru /
 
.   .  travelling buckets one is 2500 litre and the other one is 1500 liter (2 c.y.).New motor      
23876   Batching Systems
Stanley / 3 time 30 ton
 
good   .  3- 25 ton Standley batching bins      
85499   Batching Systems
Erie Strayer / MG11T
 
Very good   1990  Used 1990 Erie Strayer 10 yard batch plant, Model MG11T Can operate dry batch of Premix. Drum is part of the plant, but needs a structure. Split cement silo 75 ton for each side for 150 ton approx. Aggregate bins have an 8-ft extention. Separate cement fly ash silo, 50 ton approx. Excellent condition      
  Block Grinders            
13970   Block Grinders
Besly / 50 HP
 
.   .  Comes with (2) 50 HP motors, 30'' diameter wheels with silicon carbide abrasive, maximum throat opening of 14.75''. One piece frame. No starter      
43495   Block Grinders
Puliberica / 6 head polishing machine
 
good   early 80  Puliberica 6 head inline polishing machine for tiles. Maximum capacity of 80 x 80 cm or two 40 x 40 cm tiles. Estimated tile grinding/polishing 1200m2/shift.      
  Block Machines            
10576   Block Machines
Besser / V3R
 
Fair   1966  No Upgrades. Still installed. Comes with relay controls.      
10740   Block Machines
Stemaco / 3 at a time
 
.   .  All rebuilt 3 at a time machine: new shaft,new bushing, new bearings and brand new pallet feeder. New mold box.      
11769   Block Machines
Besser / V3R modifyed to V312
 
good   .  Besser V3R machine modified to feed from the back like a V312. Comes with Emerson drive with a speed up package and cam limit switch.      
12221   Block Machines
Besser / Dynapac (MK-2-02)
 
Very good   2003  4.5 million cycles, Dual Vibration, AFC Smartpac Vibrators, Automatic Head Clamps.      
12297   Block Machines
Columbia / 16, floor model
 
.   .  3 at a time. Can be combined with pallet handling system and rack conveyor      
14750   Block Machines
Bergen /
 
.   .  3 at-a-time      
14945   Block Machines
Columbia / 16 Pit
 
good   1966  C/w power unit attached to it. No electrical panel, no control panel.      
16883   Block Machines
Besser / V312
 
Very good   1999  Besser V312 block machine rebuilt in 2008. Comes with bescodyne and dual cam.     Recent Listing 
17352   Block Machines
Columbia / 50
 
New   .  Brand new, never used Columbia 50 block machine.     Recent Listing 
18379   Block Machines
COLUMBIA / 16 pit model
 
good   1975  Columbia 16 pit model block machine.      
18409   Block Machines
Besser / V312
 
good   1988  Has Dual Cam and Bescodyne. Was well maintained. Comes with relay controls.     Recent Listing 
21293   Block Machines
Besser / V312
 
Very good   1985  Completely rebuilt and painted with dual cams, bescodyne drive and PLC control pannel.      
58856   Block Machines
Columbia / 24
 
good   Mid 70's  3 at a time. Beefed up version of the Columbia 16. Can use Columbia 16 molds.      
80751   Block Machines
Columbia / 22 S 2D-16
 
good   1981  Including the relay control panel and a spare feed drawer. No hydraulic unit.      
87637   Block Machines
besser / V3-12A
 
Fair   1972  No Upgrades. Still installed. Comes with relay controls.      
  Block Plants Complete            
834   Block Plants Complete
Besser / V312
 
Very good   1988  Completely refurbished Besser V312 block plant including: 1988 V3-12 F model. Plc upgrade and touchscreen. 1988 80 cubic foot Besser mixer with starter panel and disconnect. New endliners and rewires switches. Blades in excellent condition. 1987 Besser SF7 cuber all wear parts replaced as needed chains etc..... Comes with pump unit and disconnect. It's a slick 150 plc processor control with small touch screen. Spade loader/Unloader with rack conveyor and updated plc and touch screen. Feed and return conveyors with new chains and wear items all replaced. 1 raw material conveyor to take green material back to the mixer. 3000 used pallets 18/1/2 x 26 x 5/16 / plus 60 racks 3bay wide by2 deep by 7 high. Besser Bto 6 Block turnover and depalleter. All equipment has been gone through for defects and all wear items have been replaced. everything is in excellent working condition.      
11796   Block Plants Complete
Columbia / 1600
 
Very good   1990  Columbia 1600 plant: Columbia 1600 machine, Paco spade 1990, Paco auto rack system, Besser sf-7 auto cuber with 3 turntable Lithibar pattern maker and pallet feede, twin shaft 100 cu. ft mixer, 20 ft. powered block conveyor, 30 ft cube conveyor, mud conveyor from mixer to machine, racks 140 of 2 bay x 4 deep x 10 high, 5600 steel block pallets, K-F auto batching, Besser turn over and bar feed. Molds are also available.      
12078   Block Plants Complete
Besser / V312F
 
good   1989  Block plant including: Helco 4 compartment aggregate bins of a capacity of 100 tons each for a total of 400 tons, Helco computer batching system, Besser 80 cu. Ft. Mixer, Besser V-3-12 ,1989 with bescodyne, dual cam and pin guidance system with Allan bradley PLC controls, pallet injector,Besser multispade loader and unloaderand automated rack transfer system,54 racks with 4536 pallets of 18 1/2 by 26 inch.Besser depalletter.Automatic Lithibar cuber with Paco 2 turntables and side feed shift plate (1998).plant is still instaled.      
12260   Block Plants Complete
Besser / V3-12
 
good   1978  Complete block plant including:Besser V312 block machine with air brake, bescodyne, dual cam upgrades and relay controls, Besser EV loader and unloader with rack conveyor, Paco box type cuber 1985, Around 2,000 used pallets, 75 racks, 4 molds: 4, 6, 8 inches and 16x16 inches, Besser 80 cu. Ft. Mixer (1990) in very good condition, 55' conveyor from the mixer to the block machine. The batching is also included: 100 ton cement silo with dust collection, cement auger and scale, 2 aggregate bins of 100 tons each unboltable for easy shipping, weight conveyor, 65' conveyor from the yard to the bins, PLC controls for the batching.      
12284   Block Plants Complete
Besser / Dynapac
 
Very good   1994  1994 Besser Dynapac block machine. Besser LSC 40 Rack Transport. Besser 3 Rack Loader/Unloader.1995 Mixer Turmac RD-80 MV mixer with solenoid valves and low profile gear boxes (includes lubricating system, electrical panel (460V3PH) and probe. Paco M 2000 Cuber with Control Panel, power unit: Besser Model AF 7W 48 w/power unit (80GPM) and pallet feeder, conveyors, depalleter. Batching system Besser batching system is a easy blend with hydronix microwave moisture system and 3 hydronix microwave bin probes. weigh batcher includes 12" x 24" gate, cylinder, solenoid and pneumatic vibrator. two aggregate receiving hoppers 10'x12'. 24" gathering conveyor (36' long 7.5HP w/ 16" dia. head pulley) feed conveyor (10' long 5HP w/12"dia. head pulley). aggregate receiving hoppers (10' x 10'6" w/ fill control panel and 1/4" AR liner plates. Paco in-line Splitter. Molds. 47 racks (8 shelves, 3 bay, and 5 pallets deep) Like New. Johnson direct-fired cure-pak SP 3500 (230V 60HZ 30, auto hi/lo) w/2 stage kiln control, auto fog panel assembly and water softner. Molds: 12” Hollow - 8” Hollow - 4” Hollow & Starters - 4” Solids - 8” Solids - 8” Split Face - 8” Split Face Corners 12” Split Face - 6” Hollows - 8’ 45 degrees - Jumbo Brick 2-1/4” Solid Concrete Brick - 12” Solid - 10” Hollow (needs side bar - cracked) - flobie Brick - 3” Solid - 2” Solid - 12” TJPT Score - Flower Design Block -      
12297   Block Plants Complete
Columbia / 22-S-2D=2
 
good   Mid 70's  Columbia Model 22 Block Machine with Columbia Automatic Offbearer UL 20, Columbia Cuber, Dynco Pallet Scraper, Approx. 1800 steel pallets 18”X20”X5/16”. Approx 45 Racks. 15 sets Mold Box hangers. 1 box of misc. spare parts and some misc mold parts. 1 complete Mold Box for producing Retaining Wall blocks.      
12350   Block Plants Complete
Adler /
 
.   1994  Board machine size 1400mm X 1400mm 2,000 pallets Number of molds for hollow and solid block. Pallet circulation system including elevator/lowerator & finger car 12 high single pallet. Pallet return line. MASA overhead cuber c/w 4 side clamp. Out product slab conveyor. Very good value        
15402   Block Plants Complete
Columbia / 16-S pit
 
good   1980  Columbia 16-S (1980), pit model, UL-26 Loader / unloader, Rack conveyor, Columbia Cuber, Conveyor elevator, Praschak 54 cu. Ft. Mixer, Weldon steam generator, Many molds.      
16544   Block Plants Complete
Besser / V312
 
Very good   1989  Besser V312 block plant complete with Besser spade loader/unloader with rack conveyor, Lithibar automatic cuber with 4 turntables and pallet feeder, E&R splitter, 1875 liter Wiggert mixer with cement scale and skip hoist, Eagle granulator 4 color system,160 racks and 5000 pallets.        
16848   Block Plants Complete
Columbia / CPM-40
 
Very good   1995  Complete CPM-40 block plant including: 81 cubic ft mixer-mixer support stand-cement batcher hopper), agg batcher (weigh scale hopper, check weight), pivot mud belt, CPM-40 columbia press, RTS, palllet turnover block rejection station, clamp turnover, model 8b cuber config 8, wood pallet & tier dispenser, cube staging conveyors, mold alignment fixtures, approximately 6700 steel pallets, 95 racks (2 bay, 9 tier, 4 deep), 3 line shaft conveyors, jiband mold change fork, misc. spare parts ie: hydrostatic pump.      
18278   Block Plants Complete
OMAG Tronic / 1400 x 780 x 55mm
 
.   1990  1990 Omag block machine, elevator OMAG 7 stages, Finger Car Rekers, OMAG Lowerator, pallet feeding device dry side,hydraulic product pushing unit, cubing unit OMAG, transport pallet magazine, pallet brush, pallet turning device, pallet cube magazine. Omag ZM1000 mixer, silo with up forwarding belt, 3-chambers silo approx 1900 pallets.      
25019   Block Plants Complete
besser / V3-12
 
good   1973  Used Besser V312 Block Plant: Comes with: Besser V3-12 B461 Block Machine, Besser Concrete Block Splitte, Besser 60 Cu. Ft Mixer, Columbia loader/unloader , Go-Corp Turnover, Go-Corp Cuber, Lithibar Matik Pattern Maker Turntables, 3 Inside Aggregate Storage Bins 9holds 40 ton of cement), 1 Inside storage cement silo (holds 50 ton cement) Superior Low Pressure Boiler, Continental Hyraulic Pump w/ 40 HP Motor Drive and Reservoir, 106 Feet Conveyor Belt w/ CatWalk (24" belt) 12 feet Metering Belt, 2 Ton Skip Hoist, Columbia Hydraulic Depalleter Ashland Scale Batcher IQ800, Cardinal Scale, 3 Hydraulic Power Units w/ Pumps and Motors, Approx 1000 Steel Pallets 18.5"x26"x1/4", set of Racks 2 bay, 2 deep, 7 high, Complete Mold Boxes (includes Vibrators and Heads) 2", 3", 4", 6", 8", 10", 12". Universal Split Face and Universal Half High, 4" Hollow, 4"x8"x12" Starter, 6" Hollow, 6"x4"4""16" Starter, 8" Hollow, Solid, Bond Beam, Score, Split Face, Split Face Corner (Siamese Style), knock-out, single, double and three score, scored striated, scored striated corner, pier, corner &sash, single, double, and double bull nose face, halves, halves in single and double bull nose. 10" Hollow, Solid, Split Face, Single Bull Nose, Double Bull Nose, Corner and Sash, Pier, Halves, Single and Double Bull Nose Halves, 10"x4"x16", Return Corners. 12" Hollow, Solid, Halves, Single and Double Bull Nose, Single and Double Bull Nose Halves, Return Corners, Corner and Sash, Split Face, Scored Striated, Bond Beam, Scored- Single, Double and 3 Score, 12"x4"x16", 14" 14"x8"x16" Hollow, 16" 16"x8"x16" Hollow.      
38432   Block Plants Complete
Columbia / 50
 
Very good   1994  Columbia 50 block machine manufactured in 1994, Columbia pts system manufactured in 1981, Columbia 108 cu. ft. Mixer, 30 ft mud metering belt conveyor and hopper, Columbia automatic batching updated in 2002, Paco automatic cuber with 3 turntable pattern maker manufactured in1997, Columbia 1224 auto splitter with pump 1995,Sidewinder semi shrink wrapper manufactured in 1998, Sidewinder semi shrink wrapper manufactured in 2001, Dustex dust collector manufactured in 1999, Sternet high capacity dust collector , 1 lines of 40 ft cube conveyor, 1 line of powered block conveyor, Low pressure natural gas boiler 12 kiln control panel, 12 mist cure system, Dust collector large one 2 Sulair air compressors, 2 Cement silos 3 load style with augers and dust collectors, Aggregate heating system, 6 compartment aggregate bin- 150 tons, 3 aggregate conveyors, Spare parts for machine, mixer and etc.      
45995   Block Plants Complete
Columbia / 16 Floor
 
good   1985  Columbia 16 HF block machine manufactured in 1985, model 16HF-34-10 with PLC controls and hydraulic unit. Columbia UL26 loader / unloader with hydraulic unit and updated PLC controls (1978). Rack Conveyor, Block Pusher. Columbia Cuber Model 3100315 with PLC controls and Hydraulic unit (1995). Steel Pallet Conveyor. Stair Chain Conveyor. Power Rollers. Slat conveyor Outfeed conveyor. Racks (Quantity?. 1300 steel pallets. Batch Control Panel. Cement auger. Extra hydraulic pump that was used with the mixer.      
61904   Block Plants Complete
Go Corp / Super Trustee
 
Fair   60's  Used GOCORP "Super" Trustee 3x Block Machine, complete, including: 3-phase, 60 cycle, 220/440 volt motors, electric control panel, remote control panel, hydraulic pump & tank, built-in auctomatic front feed pallet return. Used GOCORP Type L Magnetic Offbearer, 1 Attachment to make (6) 3 5/8 x 7 5/8 x 15 5/8 regular cored block, 1 Attachment to make (3) 7 5/8 x 7 5/8 x 15 5/8 regular cored block, 1 Attachment to make (2) 11 5/8 x 7 5/8 x 15 5/8 regular cored block, 2 Sets of Vibrator Assemblies. 887 5/16 x 18 1/2 x 26 Plain Steel Pallets, 40 times 72 block, 2 bay, 6 deck steel racks. 1 Praschak 21 cubic foot Mixer with skip hoist - Open Gear Drive. 1 Hydrobot moisture meter. Spare parts      
73867   Block Plants Complete
Besser / V312-F
 
good   1986  Besser V312-F Block machine with Besser Multi-Spade Loader/unloader, Besser Rack Conveyor for 4 Racks with updated SLC 500 PLC controls, all associated conveyors, 80 cubic foot Besser mixer, Besser Hydraulic Depalleter, in line Lithibar splitter and off line E&R splitter, Lithibar 3 Turn Table Pattern Maker Cuber, Overhead Side Feed Wood Pallet Injector, (2500) Production Pallets, (134) Racks, Jonel Batching Controls, (2) 32'x6" Wham cement screws, cement Scale (1) suspended on load cells above mixer. Complete set of molds including: Brick Mold, 4x8x16 regular mold, 4x8x16 Split face mold, 4x8x16 Split face return corner mold, 6x8x16 regular mold, 8x8x16 solid bottom bond beam mold, 8x8x16 split face return corner mold, shoes and core for single score, 8x8x16 split face mold, 8x8x16 regular mold, 10x8x16 regular mold, 12x8x16 regular mold and miscellaneous mold parts.      
74551   Block Plants Complete
Stern /
 
good   .  Complete stern block plant, including : Batching plant, low profile Cement silo 8-ft x 8-ft cone x 48-ft high cilynder containing 80 ton Mud belt feeding the block machine. Stern block machine with electric vibration on the head. relay control. All the molds from 2” to 12”, excluding the 6 and 10” mold, approximately 10 in total, including brick architectural block. 2,500 approximately 18 ½” x 26” good pallets. Stern mixer 40 cu. Ft converted to gear drive. Beco robot system to feed racks of 7 high, 2 bay, 2 deep. Each racks contains 84 blocks. The Beco robot and Beco rack stripper are pneumatic relay control. Splitter is Bestone inline or off line 24” splitter. The cuber is a Columbia model 35, to cube 70 or 90, 8” block on a pallet.Block polisher.      
79289   Block Plants Complete
Besser / V312B
 
Very good   1976  One (1) Besser 80 cubic foot mixer, one (1) motor starter, one (1) mixer support structure for 80 cubic foot mixer, one (1) easyblend batching system, one (1) 24” x 32’ – 6” inclining radial reversing metering belt conveyor, one (1) Vibrapac surge hopper, one (1) Besser v3-12b 3-at-a-time concrete products machine, two (2) sets of vibrator shafts, one (1) Columbia ul26 loader/unloader, one (1) Lithibar model 80 brick & block turnover, one (1) Columbia model 328 brick & block turnover, one (1) 20’ long gravity conveyor with supports, one (1) Sf-5 semi-automatic cuber, three (3) 52” x 10’ long cuber offload conveyor with support legs, one (1) Atlas Copco compressor, one (1) Kellogg compressor, one (1) Sl-80 skip hoist, one (1) scotts vertical wood fired boiler for steam curing [complete with valves, controls and piping, (96) steel production racks – 3 bay x 7 tier x 2 deep, 42 pallet capacity, (4,000) steel production pallets – 26” x 18.5” x 3/8”, one (1) complete 4” concrete block mould (3-5/8 x 7-5/8 x 15-5/8) 2 core 6-at-a-time, one (1) complete 6” concrete block mould (5-5/8 x 7-5/8 x 15-5/8) 2 core 4-at-a-time, one (1) complete 8” concrete block mould (7-5/8 x 7-5/8 x 15-5/8) 2 core 3-at-a-time, one (1) 12” high mold box, one (1) breeze block mold box complete with cores, liners, divisions and stripper head, one (1) Unilock paving mould complete with heater, one (1) metro paving mould complete with heater and plain shoes, one (1) cobblestone paving mould, one (1) London paving mould, one (1) road kerb mould and various mold accessories.      
80174   Block Plants Complete
Columbia / 16 HF deep pallet
 
good   1990  1990 Block machine columbia 16 HF (deep pallet machine 26”x26”) and the rest is 1976: Besser mixer of 100´cubic feet capacity, Paco spade loader-unloader, Paco platform and crawler, Lithibar semiautomatic cuber, Lithibar spliter, Batch panel, 3 silos, aprox 3,000 pallets 26”x26”, 56 racks 3 x 7 high x 4 deep, for 84 pallets each and there are more than 10 paver molds. The plant has not work since year 2000, so the block machine has only 10 years of use. Vibrator shafts missing from the block machine and some minor parts are missing from the paco platform and the L/U.      
82581   Block Plants Complete
Besser / V3M
 
Fair   Mid 50's  Besser V3M 3 at a time plant with 30 cu. Ft. Prashackl mixer, Manual offbearer, Oswald pallet receiver, set of molds: 8, 10 and 12 inch, 18 racks containing 72 pallets each so 1,300 pallets. Decent condition for the year as it was properly maintained. It is still installed.      
85677   Block Plants Complete
Stemaco / 3 at a time
 
good   .  with Stemaco block machine, 1 stern mixer 60 cf, 1 cuber semi-automatic, 1 splitter, 1 Beco handling system, set of recent 4,6,8, 10, 12, Talus, 4 '' split, brick, molds and 2,100 pallets. Equipment is dismantled      
  Block Racks            
13827   Block Racks
/
 
Very good   .  120 block racks, 2 bay 2 deep 7 high - 10-1/2" spacing. they are in very good condition.      
99140   Block Racks
Columbia / 22
 
good   .  126 Racks 7 high, 3 wide, 2 deep. Of those 18 new and 108 old.     Recent Listing 
  Block Turnovers            
16107   Block Turnovers
Lithibar / 3 at a time
 
Fair   1979  Comes with depalettor      
47911   Block Turnovers
Besser / BTO6
 
.   1990  Rebuilt completely with new PLC controls,Air&hydraulicClamp turn over      
74986   Block Turnovers
Besser-Lithibar /
 
Very good   1998  Block Turnover, no hydraulic unit or controls. Was working with a fully automatic Besser Lithibar cuber.     Recent Listing 
  Brick Machines            
2335   Brick Machines
Dunbrick /
 
.   .  3 bricks of 8 ½ x 2 ¾ x 3 ½ / Cycles. 2500 brick/hr. Approx. 12 new racks, 10 fair rack. 8000 production pallets. One Ribbon type mixer of one cubic yard approx. Along with a spare mixer for parts.NOT EXPENSIVE      
  Bush Hammers            
1475   Bush Hammers
Knauer /
 
Very good   1996  Systems of replaceable nails used for concrete surface treatment. Was barely used.      
  Color Systems            
11504   Color Systems
Hamburger / 5 tubes, liquid
 
good   1988  Comes with Gold programable PLC controler      
12780   Color Systems
Eagle / Aerogran
 
.   2000  Granular, complete with PLC controls. 3 mixer software, With a remote interface, 5 color capability, 200 product recipe. Specs: http://www.eaglecompanies.com/aerogran.html      
16041   Color Systems
Hamberger / 5 tubes liquid
 
.   late 80's  5 tube liquid, Modicon PLC controls.      
18107   Color Systems
Hamberger / M26
 
.   1995  Single tube M26, Modicon PLC controls. Liquid      
67957   Color Systems
Eagle / 5 tube
 
As new   2000  5 TUBE – 4'' DIAMETER Wilden diaphragm pumps Full automatic controls. Only used one season. Electrical control Panel /Tubes and pumps.      
92238   Color Systems
Finke / CDS-50-4
 
.   2001  Steel platform, setup for 4 colors. Granular.      
  Conveyors            
2802   Conveyors
/
 
.   .  Haul out conveyor, 42 inch rollers, 25 ft length.      
11060   Conveyors
/ concrete conv 30inch. by 32 ft
 
Very good   .  Concrete convveyor 30 inch by 32 ft long with pivoting chute      
12807   Conveyors
/
 
.   .  18” wide x 55’ long 18” wide x 1/8” x 1/16”, 150#, belting with fasteners and splicing tools 6” channel framework with support structure 35 degree, sealed troughing idlers on 18” centers at loading point, and 5’ centers thereafter. 4” diameter return rollers on 10’ centers Lagged head pulley Self-cleaning wing tail pulley, mounted on screw-type takeups. 5HP electric motor drive, 480V, 3 phase, TEFC Shaft mount gear reducer, Loading skirt with rubber wipers      
31324   Conveyors
/
 
Very good   .  Concrete conveyor 24 inch by 27 ft. Cc.      
54408   Conveyors
/
 
Very good   .  Concrete pivoting conveyor 24 inch. 18 ft. Cc.     Recent Update 
71275   Conveyors
/
 
good   .  Series of (4) V-Belt conveyors.IDEAL FOR A BLOCK PLANT BATCHING. 24 inch wideV belt. , one is 100 ft long (15 HP motor,trust 24 inch c/w walk way),One is 45 ft long (15 HP motor) one is 60 ft long (15 HP motor,24 inch trust)and there is a reversible 60ft long shuttle conveyor(two 5 HP motors). LIQUIDATION PRICE.      
  Cubing Systems            
731   Cubing Systems
Besser / SF4
 
Fair   late 60s  This unit handled 200,000 8 inch blocks per season, the bearings and sprockets might need a little work, it was in working condition when they pulled it out. No tear clamps. Power unit and controls included.      
12245   Cubing Systems
Besser / SF7
 
Very good   1985  Comes with new PLC controls and hydraulic unit. Refurbished. Can do 48x48 inch cubes or 64x48 inch cubes.      
12961   Cubing Systems
Besser / SF7 W
 
Very good   1988  Semi automatic cuber. Comes with controls.      
14050   Cubing Systems
Columbia / 313-59-1
 
.   1968  cuber for concrete blocks. Complete with slat conveyor, side push plate, hydraulic pump and controls.      
14197   Cubing Systems
Lithibar / Semi-Auto
 
Fair   .  (2) available. Were installed outside so valves and cylinders might need revision.      
20173   Cubing Systems
besser / SF5 semi auto
 
Fair   .  No pump.      
20929   Cubing Systems
Lombard /
 
.   .  Overhead cuber for blocks, made by Lombard Construction of England      
52635   Cubing Systems
Besser / SF5
 
.   .  Automatic cubing system with a single turntable, hydraulic unit, AFCE-1A automation converted to Allan Bradley SLC 100, cube pattern programmer slick controls.      
  Curb Machine            
1556   Curb Machine
Hess egglayer / Street Curbs HBII
 
good   .  (2) machines to make high product like concrete curbs.      
  Curing Systems            
1561   Curing Systems
Johnson / SP5000
 
.   1988  Capacity 5,000,000 BTU      
  Dust collectors            
2948   Dust collectors
MAC / 96MW30
 
.   1979  storage tank 4350 CFM, 398 Sq ft filter cloth, reverse air cleaning fan, rotating reverse air distributor, HD steel frame with ladder and guard-rail and accessories      
11715   Dust collectors
Air Trac /
 
.   .  Bag type dust collector. 10,000 CFM. 550 V. 10 HP.      
12035   Dust collectors
Magna Pulse / CPI 4CH
 
good   .  Used Magna pulse dust collector, model CPI-4CH. Comes with brand new fan model MV41, 5HP motor, 2000 CFM      
  Handling Systems (Blocks)            
2547   Handling Systems (Blocks)
Besser / LSC-40
 
.   1985  car and crawler only with most of the updates      
2665   Handling Systems (Blocks)
Columbia / 14-3F for Col 10ac or 20
 
Very good   .  Magnetic pallet return system for 18 1/2 x 20 pallets. System includes the following: inclined section, power roll section and pallet drop wire, brush cleaner and oiler, 2 electric magnet pallet pick ups ( OFF Bearers), 2 Power packs. Currently off a columbia model super 10ac two block.      
12190   Handling Systems (Blocks)
Columbia / UL26
 
Very good   early 80's  Completely refurbished loader unloader. Comes with all associated conveyors and a third loader as a spare (not refurbished).      
17436   Handling Systems (Blocks)
Paco / 800
 
.   1978  Automatic handling system for a 3 at a time block machine. Comes with PLC controls with touch screen (Allan Bradley) in 2000, upgraded geneva drive in 1996, new Paco 800 crawler in 2000, 48 racks, spare parts, hydraulic unit and all documentation. It was replaced in 2004.      
19881   Handling Systems (Blocks)
Columbia / UL26
 
Very good   2001  Columbia UL26 loader unloader manufactured in 2001.      
20608   Handling Systems (Blocks)
Besser / LSC-40
 
Very good   1987  Crawler and transfer car for racks 9 high by 3 deep by 3 wide. Controls.      
63003   Handling Systems (Blocks)
stemaco /
 
.   .  for any 3 at a time machine Besser or Columbia.equip was refurbised completly , bearings ,chain and all but it stayed outside for a long time      
92037   Handling Systems (Blocks)
Columbia / UL26
 
good   .  Complete handling system. External valves. Setup for 3 bay, 2 deep, 6 high.      
  Handling Systems (Pavers)            
2796   Handling Systems (Pavers)
Masa / 1400 by 1100
 
Very good   1995  Vacuum system for handling fresh pavers (out of a board machine system) over hard pavers. Comes with: Vaccum machine, hydrolic station, control board, pallet magazine, vacuum plates for several styles of pavers with a custom made holding rack.      
  Lintel Machines            
2481   Lintel Machines
Flemming / 8'
 
.   .  300 Production boards of 8' x 12 inches. Comes with Sound wall and Duracrib molds. 20 racks. Updated vibration system by Vibco.      
  Miscellaneous            
2874   Miscellaneous
Screenlite /
 
.   .  Decorative fence block machine. C/with 1 mould and a control panel.      
52247   Miscellaneous
Compair / Cyclone, 50 HP.
 
.   .  Air Compressor enclosed in a container.      
78798   Miscellaneous
Forney / QC200DR
 
.   1989  Lab testing equipment: Compressor. It has 400,000 capacity. The hydraulic pump is missing off the unit.      
80738   Miscellaneous
/
 
.   .  Dynapack feedbox in good condition      
  Mixers - Any type            
20893   Mixers - Any type
Stern / 54 cu. Ft.
 
good   .  New blades and liners by Texaloy.      
  Mixers - Other            
2910   Mixers - Other
Johnson / 4.5 c.y.
 
Very good   .  (2) Premix tilting mixer, has operated only on one job (100,000 c.y.).      
69695   Mixers - Other
Strong Industries / Gunite Mixer
 
Very good   2006  Only used in 2007.      
  Mixers - Pan type            
2642   Mixers - Pan type
roto / 40cf.
 
Fair   1980  good for precast      
2742   Mixers - Pan type
Turbobetoniera Icoma Td / 1 cu. Meter
 
.   1984  the 2 time 25 HP motors needs rebuilds of liners and re-assembly. Has new bearing in the gear box.      
2944   Mixers - Pan type
Smith / 4.5 cy
 
.   1969  2 air operated discharge doors, Dimensions: 131" O.D. x 54" height. Discharge height: 118", weight 16,500, 125 HP 460 V. Hd steel frame w/base pads      
2945   Mixers - Pan type
Voeller / cm650 2 cy
 
.   1978  Air operated discharge door, dimensions: 110" O.D. x 52" height. Discharge height 118", weight 10,000. 60HP, 440 V. HD steel frame w/base pads      
2998   Mixers - Pan type
Roto / 810-- 81 cubic ft.
 
Very good   .  81 cubic ft. 3 motor for each star are 20 HP and the drive motor is 7 1/2 HP.      
10682   Mixers - Pan type
Teka / THZ 1125 liters
 
Very good   1997  Already dismantled and ready to go.      
10902   Mixers - Pan type
mixer system / 2 cu yard
 
Very good   1995  Single discharge door air cylinder operated. 75 HP motor. 440 V.      
15490   Mixers - Pan type
Voeller / 1500 L
 
Very good   1978  Very good pan type mixer Two doors positioned at 9 and 3 (on a clock). Hydraulicly driven doors. Motor 60 HP, 3 ph, 60 cycle, (located at 12 on the clock). New Liners and blades.      
16594   Mixers - Pan type
Roto 3 cubic yard / 3 c. y. (81 cf.)
 
good   1975 app  Good pan mixers .Two of them. Comes with spare gear box and some spare parts. One of them has liners that will last one year and the other 2 years.      
29221   Mixers - Pan type
Pemat / PME 75
 
Very good   .  Planatory mixer with 1.5 meter cube output      
33514   Mixers - Pan type
Liebherr / 750 liter Baumix 30
 
good   1977  With skip hoist and allen bradley controls no216. Need liners      
34404   Mixers - Pan type
Eirich / Dev22, 2 yard
 
.   1990 or close  2 recent star drives , gear box and motor 2004 (20 hp x 2). Pan drive is 25 hp. Hydraulic pump for door 5 hp. New door cylinder, new bearings on the bottom for the door. Mixer floor lined with stallite. Controls included. Need some work on the main gear. Less than a year on the pan drive gearbox.      
47738   Mixers - Pan type
Mixer Systems / 2 yard High capacity
 
.   1995  Has 2 air cylinder operated discharge gates located at 90 degrees from eachother . 100 HP high capacity motor. 440 v.      
48806   Mixers - Pan type
Eirich / DEV22, 2,250 liter
 
.   1972  Complete with high energy Rotor. Recent Liners, arms and blades.      
56051   Mixers - Pan type
Teka / 750 updated to 1125 (3 star)
 
Very good   2000  Comes with spare parts      
75242   Mixers - Pan type
Eirich / 1 and half cubic yard
 
Fair   Early 80's  .      
  Mixers - Ribbon type            
1440   Mixers - Ribbon type
Besser / 80 cf
 
Fair   1969  Shaft and blades iin exellent shape, some liners are missing (others in fair condition), stored inside, no motor.      
2400   Mixers - Ribbon type
kent / 30 cu. Ft.
 
Fair   79  .      
2584   Mixers - Ribbon type
Prashak / 8 cf.
 
good   .  new motor 550v, 5 hp      
2585   Mixers - Ribbon type
Besser / 30 cf
 
Very good   .  Mid 70's, gear drive (no belt) air cylinder doors 3000 lbs per batch. Main gear and bearing were changed, approx 20 HP motor. Wear on liners and blades 60% left      
2647   Mixers - Ribbon type
GO-CORP / 50 cf
 
Bad   1964  Air operated discharge gate. The liners are in pretty good shape. The blade shaft and bearings needs to be replaced and so the blades. Includes a new set of shaft bearings that was paid $2800.00 USD for. Go-Corp parts are available from the Besser Company. The clutch has been eliminated so the belt wheel drives the pinion directly. It has a thirty horse 208 volt 3 phase motor.      
2688   Mixers - Ribbon type
Besser / 4 cu. Yd
 
.   .  Slump mixer.      
2879   Mixers - Ribbon type
columbia / 81c.ft.
 
Very good   1965  very good gear and pinion, Rebuilt, one new spare blade paid 2700usd.75 h.p. motor      
10500   Mixers - Ribbon type
Besser / 50 cu. Ft.
 
good   1972  Complete. Includes starter     Recent Listing 
11436   Mixers - Ribbon type
Prachack (Mixer systems) / 80 cu. Ft.
 
Fair   .  Extra heavy drive 68 HP. 220 motor      
11755   Mixers - Ribbon type
Besser / 50 cu.ft.
 
.   1980  mixer and skip hoist in good condition      
12332   Mixers - Ribbon type
GoCorp / 75 cu. Ft.
 
Very good   .  .      
12513   Mixers - Ribbon type
comflow / 10 cubic ft
 
good   .  laboratory equipt mixer      
12839   Mixers - Ribbon type
Steamaco / 60 cu ft
 
New   .  60 HP motor, brand new mixer.      
13631   Mixers - Ribbon type
Nikko / 1500 l HD
 
Fair   .  (2) 40 HP motors with gear boxes.      
17401   Mixers - Ribbon type
besser / 100
 
.   1984  Very good overhalled Besser 100 cubic foot mixer,c/w wichchita clutch, new style liners and replaceble blades.      
17951   Mixers - Ribbon type
Besser / 100 cu. Ft.
 
good   1984  Completely refurbished. Wichita clutch. Moisture probes.      
19149   Mixers - Ribbon type
Columbia / 81 cu. Ft.
 
good   1966  .      
19801   Mixers - Ribbon type
Besser / 60
 
Very good   Mid 80's  575 v, only worked 10 years. Liners and blade 75% left. Was refurbished and stoped every winter.      
20182   Mixers - Ribbon type
Besser / 80BD 80 cu . Ft.
 
.   1968  .      
20271   Mixers - Ribbon type
Columbia / 81 cu. Ft.
 
.   1974  Was modified from a 2 bull gear arrangment to a single Bull gear with transmission arrangment. Comes with controls.      
58754   Mixers - Ribbon type
Bergen / 60 c f
 
Fair   .  Complete with new blades.      
60429   Mixers - Ribbon type
Lithibar / 50 cf
 
good   1960  Comes with extra set of used liners. Bull gear, pinion and bearing were only used 2 years after replacement      
94402   Mixers - Ribbon type
Prashack / 81 DD
 
good   .  81 cubic foot mixer with spare shaft, spare motor and spare gearbox.      
  Mobile Concrete Trucks            
2490   Mobile Concrete Trucks
Daffin mobile / 8 cu. Yd.
 
.   1974  10 weel truck Kenworth. Cement meter register: count 66 for 1 cu.ft. of cement (0,2%),RPM +ou- 2%. Cement discharge: time 28 sec for 1 cu.ft. (0,2%), RPM + ou - 2%. Cement wheel no. HW 5707. Manufactured by National concrete machinery division of IRL Daffin associates incorporation.      
12590   Mobile Concrete Trucks
Cement Tech / 8 yards, Series 60 II
 
good   1999  Volumetric 8 yard. Air ride suspension.     Recent Listing 
  Molds            
69   Molds
Besser / V3R, V3-12, dynapack
 
As new   .  Besser Brick mold. It produces 12 at a time 90 w. x 75 h. x 190 l. mm bricks. Was only used for 5 hours.      
2769   Molds
Columbia / 50
 
Very good   .  3 paver mold , 8"diam manhole, half hig rw mold, and parts for round Rib molds.      
11351   Molds
Columbia / 22
 
As new   .  Holland stone. Complete with heating head and controls for the heating.      
14993   Molds
Fleming / MF3
 
Very good   2007  2 molds for 6x6 and 6x9 pavers with inserts to make them 60 mm or 25 mm high.      
15210   Molds
zenith / 844
 
.   .  Mold Listing: Uni-Décor, Uni-Décor Edger 60mm, Plazastone 6 1/4x6 1/4 60mm 80mm. Symetry 60mm 80mm Uni-Stone 60mm Uni-Stone w/ 1/2 edgers 60mm Uni-Stone 80mm Uni-Stone w/ 1/2 edgers 80mm, Plazastone 6x 1/4 x 6 1/4. Uni-Anchorlok 80mm. Patio products: Brick 2 1/4 Edgestone 100mm. Handy-Edge 80mm Turfstone 80mm.      
36854   Molds
Besser / V312
 
good   .  Used 4 inch block mold with 3 cores, 6 inch block mold with 2 cores, 8 inch block mold, 10 inch block mold and 12 inch block mold.      
43021   Molds
Fleming / MF3, 36x36
 
.   .  12 inch round 6 at a time, 24 inch Square, 24 inch round, 18 inch square brick face and plain, 12 inch post pad mold (6 at a time), 14 inch post pad mold (4 at a time), curved manhole block mold (6 at a time) and curved neck block mold (8 at a time).      
48037   Molds
/
 
.   .  (2) Molds for Besser V3-12 or Bescopak: Flue block mold that makes (1) 16x16 and (1) 8 inch block. Flue block mold that makes (1) 16x20. Imperial dimensions.      
  Pallets            
2480   Pallets
/
 
.   .  Yellow balau production pallets with side legs (1800) 1500 x 1100 mm x 110 high c/w steel cover 3/16".      
11757   Pallets
/
 
good   .  Steel covered 51 3/4" by 42 1/2 Multi Layer board. Qty 430      
11804   Pallets
/ 18 ½ x 52 x 1/2 inches
 
Very good   .  Steel pallets for a 6 at a time block machine.      
16704   Pallets
Columbia / 22
 
good   .  3840 18”X18” steel pallets, stacked at 120 per wood pallet. 32 wood pallets.     Recent Listing 
20314   Pallets
Pragatti / 1200 x 1100 x 45mm
 
.   .  1500 only, almost new pragetti wood boards size:L1200 x 1100 x 45mm      
  Paving Stone Machines            
2684   Paving Stone Machines
Knauer / 129
 
.   .  3 molds, Pallet pusher, Production Pallets.      
2926   Paving Stone Machines
Hess / HP1
 
.   1973  Good Multilayer machine and controls and a couple of molds including Holland and uni-stone      
2941   Paving Stone Machines
Knauer / 129 A Floor Layer
 
Very good   1994  Has worked only 24 months. Complete with one or two molds of 9" and 12" (special molds for light weight mineralized wood chip concrete).      
12427   Paving Stone Machines
Henke / 1400by 1100mm
 
.   1992  C/w face mix device .Machine still installed      
19339   Paving Stone Machines
knauer / 129
 
Fair   Mid 70's  2 of them, Wiring was cut but control pannel available and stored inside a container. 4 molds: Holland Stone, Cobble, Circle and ZigZag type paver.      
  Paving Stone Plants            
12088   Paving Stone Plants
Schlosser / SV40,size 1400 x 950mm
 
Very good   1993  Complete Production Plant with Block Machine Schlosser SV40 Schlosser is part of the Hess-Group of Germany - the machinery type Schlosser SV40 is capable of producing pavers, hollow blocks, curbstones or similar products.This plant has only worked 100 days since 2001. Production: 1993 Schlosser/Phillips Block Machine SV40 (Face mix is included) Eckhart Production Boards 1.400 x 950 x 50mm (approx. 2.000 - 2.050 Boards) Production Area max. 1300 x 850mm. Production Height: up to max. 500mm - Production Height: minimum 50mm. 2001-Schlosser/SEW Vibration System SV-Tronic with One-Part-Vibration-Table and 4 asynchronous SEW-Servo-Motors. Since July 2008: 2008-SEW .Upgrade of the vibration system to the latest available technology, i.e. an SEW-Moviaxis control unit with a 32-bit processor, fully ectronically controlled vibration as well as Frequency and Amplitude control for high quality densifying process: Transport of Wet Products / Board Handling / Storage: 2001 Schlosser 2 Chain Conveyors (Transporting boards from Block Machine SV40 to the Elevator), Rotating Brush. 1987-1989 Elevator 8 high stages and 510mm apart (can be made to 255mm apart, 16 high) 1989-Schlosser/Phillips Finger Car (load capacity 10.000KG), 8 high stages and 510mm apart, 2 boards deep system. Finger Car is transporting boards with concrete products to and from the curing racks. (Finger Car can change hydraulically to 255mm apart, 16 high). 1983/87-Rotho (Thomas) 12 Curing Racks (chamber for 2.592 boards, 8 high stages and 510mm apart) (can be made to 255mm apart, 16 high for approx. 5.000 boards) Transport of Cured Products and Cubing: 1990-Schlosser Buffer Cart in front of Lowerator 8 high stages and 510m apart, 2 boards deep system . (Buffer Cart can change hydraulically to 255mm apart, 16 high) 1987-Schlosser Elevator 8 high stages and 510mm apart (can be made to 255mm apart, 16 high). 1983/93-MAS/SFH/Phillips. Hydraulic Latch Conveyor, option for stone squeezer and doubler. 1991-Schlosser/Phillips 4-side Cuber No. 1 with hydraulic clamps . 4-side Cuber No. 2 with hydraulic clamps (for regrouping only). 1993-SFH/Phillips regrouping unit consisting of a movable table and a pusher (using to reconfigure a product layer) Board Return with Buffering System: ) MAS/Schlosser Board Brushing, Turnover, Stacking (22 Boards) Chain conveyor (Transporting Boards after Stacking towards Finger Car). 1983-Schlosser/Phillips Finger Car (load capacity 6.000KG), 1 stage for transporting 22 Boards to and from the buffer racks 14 Curing Racks (Chamber for 1.232 Boards, 4 x 22 Boards = 88 Boards/Rack). 2001-Schlosser 2 Chain Conveyors (Transporting Boards towards Schlosser SV40 for Destacking). Transport of Finished Cubes out of the building: 1993-SFH/Phillips Transport System runway inside 20 Double-Lorry, runway outside 19 Double-Lorry, 2 stations for changing runway. 1995-P.W. Lenzen/Siemens . Strapping vertically (steel only). 1995-P.W. Lenzen/Siemens Strapping horizontally (plastic/alternativ steel) . 1993-SFH Buffer for wooden pallets (if the finished cubes must be picked up by forklift) . Moulds: Paver 8cm 3 Sizes "Rusticus" 1,02 qm. Paver 8cm 4 Sizes "Kiem" 0,88 qm. Paver 61x40,5x10cm with rectangle hollows 1,00 qm. Kerbs 100x20x6cm 12 kerbs. Wallingstone Typ A (Height 25cm) Gardenproduct-Hollowstone 6 stones. Wallingstone Typ B (Height 25cm) Gardenproduct-Hollowstone 4 stones. Wallingstone Typ C (Height 25cm) Gardenproduct-Hollowstone 8 stones. Wallingstone Typ D (Height 25cm) Gadenproduct-Hollowstone 4 stones. Wallingstome Typ C Mini (Height 20cm) Gardenproduct-Hollowstone 12 stones. Wallingstone Rectangle 60x40x25cm (Height 25cm) Gardenproduct-Hollowstone 4 stones. Wallingstone Rectangle 30x40x25cm (Height 25cm) Gardenproduct-Hollowstone 8 stones. Wallingstone (Dubbleblock for breaking in the middle) (Heigth 25cm) Gardenproduct-Fullstone 24 stones.        
12330   Paving Stone Plants
Rekers / KRS 33
 
.   1994  1994 Rekers single layer press model KRS 33,for pallet size 1400 X 950mm, c/w face mix section. Rekers PLC controls. Compatible with Siematic. Elevator-Lowerator 10 high & double pallets 400 mm storey high. 16 tons capacity. Finger car 10 high, double pallets for 16 rooms. Dynamic buffer for a complete finger car load of boards. Signode horizontal/vertical strapper after 4 sides squeeze. Board brush and board turner. Automatic clamping cuber. Galvanized clip curing room system for 16 tunnels, 14 full and 2 empty. Capacity 2260 boards. Approximately 3,300 hardwood production boards size 1400mm X 950mm X 40mm Set of molds for paver blocks and bricks.Complete batching plant by Teka c/w 1500 liter and 2200 liter mixer package.      
12344   Paving Stone Plants
MASA / 1400 X 1100
 
.   1989  Year 1989. Pallet size 1400x1100 mm. Efficient circulation system for steel pallets. Vacuum station with cuber for taking off paving stones from steel pallet New hydraulic power unit. 300 plastic pallets with side board. 6 moulds. teel pallet return machine and pallet turner. Electronic control PLC. Colourmat colour dosing 5 colours. Pallet destacker for plastic pallets. Walking beam Slab conveyor for inspection. Cuber. Plastic strapping machine horizontal Conveyor with wagons outside. New power hydraulic station. A lot of spare parts. Very good value since this plant can work like a multilayer in the cycle time of a normal board machine.      
13897   Paving Stone Plants
Henke / 1400 by 1200 mm
 
.   1989  Henke press with variable frequency vibrators, mid 70 elevator lowerator fingercar. Clamp transfer, 6 molds 2000 aprox pallets, relay controls. Holland-Daman 1500 liters pan type mixer. Cyclop horizontal strapping system.      
14470   Paving Stone Plants
Omag Troniq / 1400 x 780 x 55mm
 
good   1990  1990 Omag block machine, elevator OMAG 7 stages, Finger Car Rekers, OMAG Lowerator, pallet feeding device dry side,hydraulic product pushing unit, cubing unit OMAG, transport pallet magazine, pallet brush, pallet turning device, pallet cube magazine. Omag ZM1000 mixer, silo with up forwarding belt, 3-chambers silo approx 1900 pallets.      
15009   Paving Stone Plants
Hess / 350
 
good   1986  Comes with: new filler box and new vibrators, (1700) boards with legs and with top covered with steel plate, stacker and destacker on wet and dry side, Pallet cleaning brush, . Production height from 45 to 300 mm      
15253   Paving Stone Plants
Knauer / 400-5
 
good   .  Used Knauer 405 multi-layer machine, complete with: Lots of spare parts (new and used), Pallet ejector and pallet magazine, transfer cube system to transfer from steel pallet to wooden pallet, PLC controls, 6 to 8 paver molds, approximately 160 production pallets.      
17865   Paving Stone Plants
Schlosser and Rekers / 1400 x 1420 mm
 
good   .  Used board machine plant including: SCHLOSSER Type VABH6 pallet size 1400 x 1420 mm board machine, REKERS handling system, Batching plant, ROTHO curing chambers, Production pallets, Set moulds for paving stones.      
18246   Paving Stone Plants
Omag / 1400 x 900 mm
 
Very good   2000  Used Omag Paver Plant. Press is Omag, year 2000, Board dimension: 1400 x 900 mm, Has worked until 2007, Comes with: Omag Board machine, Elevator, Lowerator and finger car (16 high), Buffer lane for 8 pallets stacks, KVM palletizer. 1 paver Mould. Controls (year 2002), Wooden pallets Quantity: 1,800, Cuber, Pallet turnover by KVM, SKAKO mixer 2,200 liters, Voltage is 380V, European. 1 paver mold. Note: Finger car requires controls, Liquidation price for fast sale since the land has to be evacuated by spring 2010.     Recent Listing 
20012   Paving Stone Plants
Hess / Hydromat HPIII A
 
.   1987  Multilayer paving stone machine with 60 hardwood production boards, 4 good molds, pallet feeder, Pallet Push off to transfer from production board to wooden pallet, Fejmert mixer 1125 liters with two discharge doors at 180 degrees on a structure with belt conveyor to feed the machine. Controls and electrical panel included.      
38113   Paving Stone Plants
Tiger / PS100
 
good   1998  Tiger PS100 with face mix, complete plant 1350by 1150 mm. Approx 4400 steel plate of 9/16" thick,10 molds first in first out Tiger handling system, cuber, etc      
51008   Paving Stone Plants
Omag / 1400x1000
 
Very good   1992  OMAG board machine with face mix device, Pallet size 1400 x 1000 mm, Pallet handling system OMAG, Elevator, lowerator, finger car (non-turnable) with 15 stages, stage distance: 280 mm, pallets per stage: 30, cuber, pallet stacking device wit 4-side-clamp, strapping devices: RIDDER: vertical and horizontal, slat conveyor for product cube transportation, pallet cross conveyor, curing chambers, zinced, ROTHO, 16 chambers 9 production pallets, approx. 2600      
  Pipe or Manhole Plant Components            
12265   Pipe or Manhole Plant Components
Hawkeye / 42” inside diameter
 
.   .  Hawkeye manhole forms 42” inside diameter (external vibration). 500, 750, 1000, 1250mm height (cores and jackets)      
14192   Pipe or Manhole Plant Components
Zublin / ASMS 150 AS
 
Very good   1993  Dismantled and ready to go.      
  Pipe or Manhole Plants Complete            
12270   Pipe or Manhole Plants Complete
Vihy type home made /
 
good   .  2 Home made pipe machine inspired by Vihy type machines. Comes with the following molds. Two 6 inch diameter by 3 feet long with +/- 30 male rings. two 8 inch diameter by 4 feet long with +/- 30 male rings, two 10 inch diameter by 6 feet long with +/- 40 male rings, one 12 inch diameter by 6 feet long with +/- 50 male rings, one 15 inch diameter by 6 feet long with +/- 50 male rings, one 18 inch diameter by 6 feet long with +/- 40, two 24 inch diameter by 6 feet long with +/- 50 male rings, one 30 inch diameter by 4 feet long with +/- 24 male rings and one 36 inch diameter by 4 feet long with +/- 30 male rings. Comes with half a yard ribbon type mixer (15 HP motor) and conveyor and skip hoist to feed the pipe machine. Pipe machines include a feeding bin conveyor powered by a 3 hp motor, Interior mold that lifts and goes down underground, Mold receiving table with vibrator activated by a 7.5 hp motor @ 3250 RPM , 12 feet hydraulic cylinder driving the assembly, Hydraulic cylinder to compress female mold attachment, Hydraulic power unit for each machine of 13 gallon per minute, 7.5 HP, 600 Volt, Manhole machine 900 mm and 600 mm that can be adapted to make pipes. Product is being produced upside down. +/- 15 base rings plates for the 900 and +/- 12 for the 600.      
12380   Pipe or Manhole Plants Complete
Pedershaab / VIHY Module Simplex 60/200
 
.   1987  The VIHY Modul Simplex is manually operated, but with electrically or hydraulically powered operations. Reinforced and non-reinforced pipes, circular or non-circular pipes with or without socket, with or without prebed, manholes, tapers, jacking pipes, box culverts, as well as PE-lined and PVC lined pipes can be manufactured with this machine. The machine is from 1987 and was taken out of commission at the end of 2008 and are in good condition. The machine has been well maintained.Mould equipment that comes with the machine: Mould equipment complete ø 54” (1400) mm) x 2,5 m. Mould equipment complete ø 60” (1500 mm) x 2,5 m. Mould equipment complete ø 66” (1600 mm) x 2,5 m. Mould equipment complete ø 72” (1800 mm) x 2,5 m. Mould equipment complete ø 84” (2100 mm) x 2,5 m. There are no pallets, spigot former rings or fibre glass set rings      
17125   Pipe or Manhole Plants Complete
PRINIZING /
 
good   1989  Manhole production plant PRINIZING. Comes with REKERS handling system, incl. moulds, base rings for DN 1000, DN 1200, DN 1500.      
21092   Pipe or Manhole Plants Complete
BAUMGÄRTNER / Atlantic
 
good   1993  Manhole production plant BAUMGÄRTNER Atlantic (y.o.m. 1993). Comes with handling system, moulds and base rings for DN 800, DN 1000. Manhole-ending (lowest element) production plant NIEMEYER (y.o.m. 1997). Comes with handling system, incl. moulds for DN 800, DN 1000, steel pallets,      
21129   Pipe or Manhole Plants Complete
BAMGÄRTNER / Atlantik
 
Very good   1992  For manufacturing of manhole pipe and cones. Consisting of: Manhole pipe machine BAUMGÄRTNER Atlantik, including moulds and base rings for dia 1000 (DIN 4034),      
87588   Pipe or Manhole Plants Complete
B & S / Polymat 2000
 
.   1995  B & S square manhole base plant. Polymat 2000 manhole plant suitable for manhole bases and manhole rings Dimension; 80x80cm, 100x100 cm, Max.height 1.45m., App. 20 steel base pallet 80x80cm, App. 20 steel base pallet 100x100cm, Steel fiberglass top rings 80x80/100x100, App. 20 steel pallets to put manhole bases for drying Conveyor belt app. 6 m. going to hopper, Hopper with conveyor belt frequency controlled, Belt feeding mould frequency controlled Two mould square 80x80, 100x100cm. Vibrating station with inverters Nordac, Electric controll panell Siemens S5, New steel pallet input system Rekers, Pressing head station, Moving floor station to take manhole base out, Storage system for drying manhole bases.      
  Shot Blast Machine            
96654   Shot Blast Machine
Home made / Home made
 
Fair   .  17 foot long, 8 foot 2 inches large and 9 foot 1 inch high. Slat conveyor 36 inches wide. Single shot blast impellor. Bucket elevator. Supporting frame. 2 pallets of new pellets. Dust collector (no fan, we can supply one for $2,000 ). Has operated for only 2 years. Requires refurbishing. No controls.      
  Silos            
2946   Silos
/ 43 tons
 
good   .  Capacity 225 barrels or approximately 43 tons. 8 feet diameter for easy shipping. Approx 25 foot high. Heavy duty frame with base pad. 4’’ diameter loading pipe (50-ft). Air pads for aeration. Low level device. Access door and internal ladder. Shaker type baghouse. 20 ft cement auger.      
10356   Silos
/
 
Very good   .  Capacity : 37,500 Gal. Imp. (6,000 Cu. Ft.), Dimensions : 12`- 0 dia. X 60`- 0 high ( straight shell : 52`-2``), Cône 60 degré à 54 `` from ground Exit Cone diameter: 13 ``, Thickness : 3/16 inch, Weight : 30,000 lbs Interior finish : epoxy, Insoluted Skirt with access door 28 X 58, 20 inch clamp roof manhole and 24` breather, Rotative valve .      
10421   Silos
Belgrade / 168 ton or 900 BBL
 
Very good   2006  Belgrade cement silo. Fully equipped with ladder, dust collection and sub-structure. Comes with blower , vibrator and cement auger.      
11325   Silos
/ 300 ton
 
good   .  Two only 300 ton silos .12ft dia and 65 foof lenght in total. Dust collector, hand rail. Bin air flow system suporting structure, etc.      
12071   Silos
/ 150 ton
 
.   .  150 ton 800 bbl ground mount silos with bin activators (electromagneitc vibrator on the cone with is liked to the main cylingder with a flexible rubber section) and caged ladder. 12 feet diameter, 44 ft long silo including 7 feet cone.      
13316   Silos
/ 190 ton
 
.   .  1000 bbl (190 ton) single compartment. Storage sile 12' diam, 34' in the barrel, hand rails for roof, caged ladder. Attached columns are 6'-3'' below the barrel and equal to the cone. The base plates 16' x 16'' x 1 1/2'' thick. No lower structure and no bag house      
16415   Silos
/ 30 ton capacity
 
good   .  8' large, 9.5' high, 16' long. Comes with cement auger 8'' diameter with reductor and 5 HP motor, 4'' loading pipe. NO dust collection      
16430   Silos
/ 50 ton
 
Fair   .  ladder and legs.      
16638   Silos
Johnson / 40 ton or 270 barrels
 
good   .  Mobile cement silo. Comes with cement auger and dust collection.      
18031   Silos
Erie / 110 ton
 
.   .  Used Erie 600 bbl (110 ton) storage silo 10' x 8' x 26'-6'' with 9'6'' attached legs. The attached legs extend 3'-6'' below the bottom of the cone. Columns and base plates are 10'-2'' x 8'-2'' on center. An additional suppport structure is available that is 7'-7'' tall. A Griffin shaker type bag house is also included.      
19178   Silos
Belgrade / 300 BBL, 60 ton portable
 
Very good   1998  Portable Belgrade cement silo. Fully equipped with ladder, dust collection and sub-structure. Dimensions: 32 feet without the dust house (dust house is 4 1/2 feet- taken off to move it). the width is 8 1/2 feet (on one side there is a ladder which protrudes about 1 foot). Comes with blower, vibrator and cement auger of 10 inch diameter.      
20645   Silos
/ 44 ton
 
good   .  44 ton silo. 7' dia X 27'6'' long including cone.      
39865   Silos
/ 133 metric tons
 
.   .  Used cement silo. Equipped with ladder and sub structure. Cylinder is 33' 8'' high, 10 ' 8'' diameter. Cone is 7'' high. Sub structure is 5 foot high under the cone. Has been sandblasted and painted.      
47377   Silos
/ 68 ton
 
good   .  12-Ft diameter by 28- Ft in total length 12-ft cylinder with long 9-ft cone and an 8-ft leg extension at the bottom of the skirting. Capacity 1700 cubic ft.No dust collector Very good condition. Lined with epoxy.      
56843   Silos
/ 68 ton
 
.   .  68 ton (short)silo, 7' 6'' diam., 43' long including 5 ' long cone. Complete with new dust collector & all accessories& a sub structure of 25 ft approx. Baghouse is 7 ft over the silo.      
65773   Silos
/ 62 ton
 
good   .  62 ton silo, 7' 6'' diam., 34' long including 5 ' long cone. Complete with new dust collector & all accessories& a sub structure of 25 ft approx. Baghouse is 7 ft over the silo.      
88998   Silos
/
 
Very good   .  2 used cement silos: Capacity : 36,000 Gal. Imp. (5,815 Cu. Ft.), Dimensions : 12`- 0 dia. X 56`- 0 high ( straight shell : 50`- 0 ), Cône 60 degree with exit at 21inches from ground, Thickness : 3/16 inch, Weight : 23,000 lbs, Interior finish : epoxy, Insoluted Skirt with access door 28 X 58, 20 inch clamp roof manhole and 24` breather.      
  Skip Hoist System            
2399   Skip Hoist System
/ 3/4 & 1 1/2 yd
 
Bad   .  (2) skip hoists. First one is a 1 1/2 yd, 20 to 1 ratio, 10 HP, right angle drive. The other one is a 3/4 yd, 5 hp, right angle drive      
2498   Skip Hoist System
Columbia / 54
 
.   .  54 cu ft.      
11069   Skip Hoist System
Stern / 60
 
.   .  .      
  Slab Machine            
10891   Slab Machine
Kalkman / wet cast plant
 
.   1996  Kalkman filling station (automatic) - Handling system including stacker and destacker, demolder and flat stacking on pallets- All molds already loaded in container. Approximately 3,000 of them - Cycle 10 sec for big or small slab. Approx 5,000 sq. ft./day (8 hours) -Kalkman is a Nederland company with 50 years of experience in wet cast paving slabs.      
12186   Slab Machine
Chiessa / 8 station
 
good   late 70  Eight stations slab machine with front and back feeder dozer. Comes with the following molds: 20 X 25 cm, 30 x 30 cm, 40 x 40 cm. Estimated tile production 400m2/shift. Machine is already dismantled.      
12186   Slab Machine
OCEM / OPA 1440 7 stations
 
good   early 80  Seven stations slab machine. Automatic front face and back feed cycle. Front face dozer. Comes with the following molds: 20 X 20 cm, 25 X 25 cm, 30 X 30 cm thin, 30 X30 cm thick, 40X40 cm, 50 X 50 cm. Maximum tile size 60 x 60 cm. Estimated tile production 1000 m2/shift. Machine is already dismantled.      
18152   Slab Machine
Fielding / Single pocket
 
Very good   Mid 70's  Fielding press single pocket in excellent condition comes with hydraulic power unit. Equipment includes: Approximately 100 Steel production pallet 51 5/8 x 48 ¼ x 12 5/8 inches. Complete set of approximately 9 molds including: 18x18, 24x24, 24x30, 18x18 Slate Type Masonry product, Etc.      
21024   Slab Machine
Henke / 60 / 300 / 6
 
Very good   2003  Used Henke Tile Press, Main pressing station (300 ton) -Henke 60 / 300 / 6 (2 Units), Main concrete doser, Second feeding doser Hydraulic unit, 6 station hermetic tile press, Pre-pressing station 30 tons, 4 moulds: 30 x 30, 40 x 40, 50 x 50 and 60 x 40 cm Tiles, 24 varieties of patterns. Take-off device -Weser 100(2 Units + 1 Fully automatic - with integrated direct washing unit spare) Designed for stacking the tiles vertically Galvanized pallets 1.150 x 750 mm 150 nos. Shot Blasting Machine -Henke Type PS 600 - working width 600 mm, 2 turbine shot guns. To produce matt finished tiles.     Recent Listing 
34285   Slab Machine
OCEM / OPA 540 5 stations
 
good   mid 80  Five stations slab machine. With front face mixture dozer (face mix). Comes with the following molds: 20 x 20 cm, 30 x 30 cm, 40 x 40 cm, Estimated tile production 300m2/shift. Machine is already dismantled.      
  Splitter            
2901   Splitter
Home made / 2 post
 
Very good   1988  24 inch home made splitter, 2 post (2'' shafts) for block. No indexing system.      
11031   Splitter
Masa / 48 inches
 
good   2000  Comes with ACP indexing system, hydraulic unit with no pump or motor, no controls.      
12710   Splitter
Columbia / 924
 
good   1988  Comes with straight blades and side blades, old style electrical panel and hydralic pump unit with 15 hp, 3 phase, 230/460 volt motor and air fan cooler. this one uses a wheel on the side to adjust to the size block to split. Comes with disconnect and starter.      
13614   Splitter
Hess / 48 inch, SP DR 3'' to 12''
 
Very good   1998  48 inch splitter. C/w: Power unit, Positioning powered roller conveyor 1300 x 4500 mm. Second positioning conveyor 1600 x 1300 mm. Pusher indexer to index concrete rows to splitter. Out of the splitter belt conveyors, 1300 mm x 4 meter long.      
15627   Splitter
Columbia / 1224
 
Very good   1995  Complete with infeed conveyor belt, pump and spare parts and blades.      
17562   Splitter
Besser Proneq / Pro Split 30
 
.   1987  2 way split , all electric splitter with a 30 inch. adjustable blades.7.5 hp motor on blade action and c/w electric auxiliary chain pusher      
18365   Splitter
Paco / 48 inch
 
good   .  48 inch splitter with ACP bar feeder, PLC controls. Rebuilt in 1999.      
19283   Splitter
Home Made /
 
Very good   1987  4 post, can split block and brick. No indexing system, no blades installed.      
19734   Splitter
Home made / 48 inch
 
good   .  Strong and fast Splitter 48 inch blade 4 way split. C/w vickers 60 gpm Allen bradly controls      
20086   Splitter
Go-Corp /
 
good   .  Semi-automatic with limit switches Pacific go corp 24"splitter c/w hyd power unit. Was splitting up to 12 inch high product.      
21326   Splitter
Columbia / 328.59-4
 
.   Early 70's  C/w hydraulic pump. 600v.      
35186   Splitter
LITHIBAR BESSER / 6386, 4-Way
 
good   1993  4 Way splitter with ACP bar feeding system. PLC controls. No hysdraulic unit.      
51048   Splitter
Columbia / 510-8-2
 
.   1971  Semi-Automatic 4-way splitter. Comes with pumping unit.      
  Strapping System            
1117   Strapping System
Ridder / AM101H
 
.   1984  for blocks. 380 volt, includes sleeveless 1/2" steel vertical strap head, stand, guides, strap coil stand, hydraulic pump, controls and misc. spare parts.      
17277   Strapping System
Ridder / AM404H
 
.   2001  horizontal 13 mm steel bander. Fully automatic. Siemens PLC. Hydraulic unit.      
20662   Strapping System
Signode / M261DLK
 
.   1974  Signode automatic vertical steel strapping machine for blocks.      
89688   Strapping System
Orgapack / Horizontal plastic
 
As new   1999  Horizontal plastic strapping line. Comes with one pallet of strappiing bands. PLC controls. Was installed but was only used for 8 hours! Now dismantled.      
  Tumbler Equipment            
10071   Tumbler Equipment
/ Feeding system
 
Very good   .  USED PUSHING SYSTEM FOR FEEDING A TUMBLER. Frame mounted pusher with 36’’ stroke for feeding paving stone and/or SRW bocks to the tumbler from a pallet. Hydraulic system including valve and tank Controls are electric (manual) Voltage is 575Volts.      
11483   Tumbler Equipment
Didion rotary equipment / MD-100
 
.   1990  54'' diameter x 27' length. Variable speed. Voltage 220, 3 phase.      
12665   Tumbler Equipment
MIV /
 
good   2002  Drum only. In Europe.     Recent Listing 
13692   Tumbler Equipment
Home made /
 
good   2002  Home made tumbler. Includes rubber liner not installed. No inclination adjustment.      
19074   Tumbler Equipment
Vena / Vena, 5 ft. Diam.
 
good   .  Vena tumbler with controls. Drum was replaced in 2004. Needs rubber liner replacement.      
19984   Tumbler Equipment
/
 
good   .  Tumbling line: Comes with: Feeding hopper, Input conveyor, Tumbler, Output conveyor to drop into Bulk Bags.     Recent Listing 
51499   Tumbler Equipment
DIT Equipment / Squidly with Besser SF4 cuber
 
Very good   2003  Semi-automatic re-cubing system for pavers and SRW. 12 feet long by 48 inch wide sorting table. Combined with Besser SF4 cuber.        
87860   Tumbler Equipment
DIT Equipment / 5-22
 
As new   2007  Slightly used DIT Equipment Tumbler. Was only used for 4 months.      
  Wrapping Machine            
2809   Wrapping Machine
Muller / Hs 446
 
.   1975  115 volts .      
11708   Wrapping Machine
Sidewinder /
 
.   .  Portable shrink wrap machine.      
17612   Wrapping Machine
Signode / 202
 
Very good   2002  Automatic Wrapping Machine c/w plc control